Advanced Engineering Research 2022. V. 22, no. 3. ISSN 2687−1653
Theoretical
Advanced
Engineering
Research
Vol. 22, no. 3
and scientific-practical journal
Published since 1999
Quarterly
July-September 2022
ISSN 2687-1653
DOI: 10.23947/2687-1653
Founder and publisher ─ Federal State Budgetary Educational Institution of Higher Education
Don State Technical University (DSTU)
The journal was known as Vestnik of Don State Technical University (until August 2020)
Included in the list of peer-reviewed scientific editions where the basic research results of doctoral, candidate’s theses
should be published (State Commission for Academic Degrees and Titles List) in the following research areas:
01.02.01 – Analytical Mechanics (Engineering Sciences)
01.02.04 – Deformable Solid Mechanics (Engineering Sciences)
01.02.04 – Deformable Solid Mechanics (Physicomathematical Sciences)
01.02.06 – Dynamics, Strength of Machines, Gear, and Equipment (Engineering Sciences)
05.02.02 – Engineering Science, Drive Systems and Machine Parts (Engineering Sciences)
05.02.04 – Machine Friction and Wrear (Engineering Sciences)
05.02.07 – Technology and Equipment of Mechanical and Physicotechnical Processing (Engineering Sciences)
05.02.08 – Engineering Technology (Engineering Sciences)
05.02.10 – Welding, Allied Processes and Technologies (Engineering Sciences)
05.02.11 – Testing Methods and Diagnosis in Machine Building (Engineering Sciences)
05.13.11 – Software and Mathematical Support of Machines, Complexes and Computer Networks (Engineering Sciences)
05.13.17 – Foundations of Information Science (Engineering Sciences)
05.13.18 – Mathematical Simulation, Numerical Methods and Program Systems (Engineering Sciences)
The journal is indexed and archived in the Russian Science Citation Index (RSCI), in the International Database
EBSCO (Academic Search Ultimate Magazines and Journals), Dimensions, CyberLeninka, ROAD, GoogleScholar.
The journal is a member of Directory of Open Access Journals (DOAJ), Association of Science Editors and Publishers
(ASEP) and CrossRef.
Certificate of mass media registration ЭЛ № ФС 77 – 78854 of 07.08.2020 is issued by the Federal Service for Supervision
of Communications, Information Technology, and Mass Media
The issue is prepared by:
Inna V. Boyko, Marina P. Smirnova (English version)
Founder’s, Publisher’s and Printery Address:
Gagarin Sq. 1, Rostov-on-Don, 344003, Russia. Phone: +7 (863) 2-738-372
E-mail: vestnik@donstu.ru http://vestnik-donstu.ru/
Don State Technical University, 2022
Стр.2
Advanced Engineering Research 2022. V. 22, no. 3. ISSN 2687−1653
Editorial Board
Editor-in-Chief — Besarion Ch. Meskhi, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
deputy chief editor — Valery P. Dimitrov, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
executive editor — Manana G. Komakhidze, Cand.Sci. (Chemistry), Don State Technical University (Russian Federation);
executive secretary — Nadezhda A. Shevchenko, Don State Technical University (Russian Federation);
Sergey M. Aizikovich, Dr.Sci. (Phys.-Math.), professor, Don State Technical University (Russian Federation);
Kamil S. Akhverdiev, Dr.Sci. (Eng.), professor, Rostov State Transport University (Russian Federation);
Imad R. Antipas, Cand.Sci. (Eng.), Don State Technical University (Russian Federation);
Hubert Anysz, PhD (Eng.), assistant professor, Warsaw University of Technology (Republic of Poland);
Ahilan Appathurai, national junior research fellow, Anna University Chennai (India);
Gultekin Basmaci, professor (Eng.), Mehmet Akif Ersoy University (Turkey);
Yuri O. Chernyshev, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
Evgenii A. Demekhin, Dr.Sci. (Phys.-Math.), professor, Financial University under the RF Government, Krasnodar branch
(Russian Federation);
Oleg V. Dvornikov, Dr.Sci. (Eng.), professor, Belarusian State University (Belarus);
Karen O. Egiazaryan, Dr.Sci. (Eng.), professor, Tampere University of Technology (Finland);
Victor A. Eremeev, Dr.Sci. (Phys.-Math.), professor, Southern Scientific Center of RAS (Russian Federation);
Nikolay E. Galushkin, Dr.Sci. (Eng.), professor, Institute of Service and Business, DSTU branch (Russian Federation);
LaRoux K. Gillespie, Dr.Sci. (Eng.), professor, President-elect of the Society of Manufacturing Engineers (USA);
Ali M. Hasan, PhD (Computer Engineering), Al Nahrain University (Baghdad, Iraq);
Huchang Liao, IET Fellow, BCS Fellow, Sichuan University (China);
Hamid A. Jalab, PhD (Computer Science & IT), University of Malaya (Malaysia);
Revaz Z. Kavtaradze, Dr.Sci. (Eng.), professor, Raphiel Dvali Institute of Machine Mechanics (Georgia);
Janusz Witalis Kozubal, Dr.Sci. (Eng.), Wroclaw Polytechnic University (Republic of Poland);
Ilya I. Kudish, PhD (Phys.-Math.), Kettering University (USA);
Victor M. Kureychik, Dr.Sci. (Eng.), professor, Southern Federal University (Russian Federation);
Geny V. Kuznetzov, Dr.Sci. (Phys.-Math.), professor, Tomsk Polytechnic University (Russian Federation);
Vladimir I. Lysak, Dr.Sci. (Eng.), professor, Volgograd State Technical University (Russian Federation);
Vladimir I. Marchuk, Dr.Sci. (Eng.), professor, Institute of Service and Business, DSTU branch (Russian Federation);
Vladimir M. Mladenovic, Dr.Sci. (Eng.), professor, University of Kragujevac (Serbia);
Murman A. Mukutadze, Cand.Sci. (Eng.), professor, Tambov State Technical University (Russian Federation);
Andrey V. Nasedkin, Dr.Sci. (Phys.-Math.), professor, Southern Federal University (Russian Federation);
Tamaz M. Natriashvili, academician, Raphiel Dvali Institute of Machine Mechanics (Georgia);
Nguyen Dong Ahn, Dr.Sci. (Phys.-Math.), professor, Academy of Sciences and Technologies of Vietnam (Vietnam);
Nguyen Xuan Chiem, Dr.Sci. (Eng.), Le Quy Don Technical University (Vietnam);
Sergey G. Parshin, Dr.Sci. (Eng.), associate professor, St. Petersburg Polytechnic University (Russian Federation);
Konstantin V. Podmaster’ev, Dr.Sci. (Eng.), professor, Orel State University named after I.S. Turgenev (Russian Federation);
Roman N. Polyakov, Dr.Sci. (Eng.), associate professor, Orel State University named after I.S. Turgenev (Russian Federation);
Valentin L. Popov, Dr.Sci. (Phys.-Math.), professor, Berlin University of Technology (Germany);
Nikolay N. Prokopenko, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
José Carlos Quadrado, PhD (Electrical Engineering and Computers), Polytechnic Institute of Porto (Portugal);
Alexander T. Rybak, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
Muzafer H. Saračević, full professor, Novi Pazar International University (Serbia);
Arestak A. Sarukhanyan, Dr.Sci. (Eng.), professor, National University of Architecture and Construction of Armenia
(Armenia);
Vladimir N. Sidorov, Dr.Sci. (Eng.), Russian University of Transport (Russian Federation);
Arkady N. Solovyev, Dr.Sci. (Phys.-Math.), professor, Don State Technical University (Russian Federation);
Mezhlum A. Sumbatyan, Dr.Sci. (Phys.-Math.), professor, Southern Federal University (Russian Federation);
Mikhail A. Tamarkin, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
Murat Tezer, professor, Near East University (Turkey);
Bertram Torsten, Dr.Sci. (Eng.), professor, TU Dortmund University (Germany);
Vyacheslav G. Tsybulin, Dr.Sci. (Phys.-Math.), associate professor, Southern Federal University (Russian Federation);
Umid M. Turdaliev, Dr.Sci. (Eng.), professor, Andijan Machine-Building Institute (Uzbekistan);
Ahmet Uyumaz, Dr.Sci. (Eng.), professor, Mehmet Akif Ersoy University (Turkey);
Valery N. Varavka, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation);
Igor M. Verner, Cand.Sci. (Eng.), docent, Technion (Israel);
Sergei A. Voronov, Dr.Sci. (Eng.), associate professor, Russian Foundation of Fundamental Research (Russian Federation);
Batyr M. Yazyev, Dr.Sci. (Phys.-Math.), professor, Don State Technical University (Russian Federation);
Vilor L. Zakovorotny, Dr.Sci. (Eng.), professor, Don State Technical University (Russian Federation).
Стр.3
Advanced Engineering Research 2022. V. 22, no. 3. P. 179 ISSN 2687−1653
CONTENTS
MECHANICS
Petukhov D. S., Adamov A. A., Keller I. E. Selection and Identification of a Model of ElastoViscoplasticity
of the Filled Fluorocomposite according to Free and Constrained Compression Tests ...................... 180
Belonozhko D. G., Korolev I. D., Chernyshev Y. O., Ventsov N. N. Methodology for Determining the
Probability of Damage to Unmanned Aerial Vehicles as a Result of Exposure to Atmospheric Environmental
Factors ............................................................................................................................................................................ 193
Saypulaev G. R., Saypulaev M. R., Merkuryev I. V., Adamov B. I., Garcia R. B. Application of an Inertial
Sensor Unit for Position Estimation and Motion Control of the Lower-Extremity Powered Exoskeleton ................ 204
Peshkhoev I. M., Sobol B. V. Critical Loads of Uniformly Compressed Orthotropic Rectangular Plate on
an Elastic Base ........................................................................................................................................................................... 214
Pakhnutova N. V., Boyangin E. N., Shkoda O. A., Zelepugin S. A. Microhardness and Dynamic Yield
Strength of Copper Samples upon Impact on a Rigid Wall ................................................................................................ 224
MACHINE BUILDING AND MACHINE SCIENCE
Lyudmirsky Y. G., Leonov V. P., Assaulenko S. S. Increasing the Durability of Butt-Welded Joints Operating
under Cyclic Loads in a Biaxial Stress Field ................................................................................................................................................ 232
Tsybrii I. K., Koval N. S., Issabekov Z. N. Study of Tapered Threads Parameters Affecting the Quality of
the Oil Pipeline Connection ..................................................................................................................................................... 242
Lyudmirsky Y. G., Assaulenko S. S., Kramskoi A. V. Methods and Equipment for Experimental Evaluation
of the Performance of Shell and Hull Structures .................................................................................................................. 252
INFORMATION TECHNOLOGY, COMPUTER SCIENCE, AND MANAGEMENT
Amera Al-Funjan, Farid Meziane, Rob Aspin. Describing Pulmonary Nodules Using 3D Clustering .................... 261
Elshamy M. M. M., Tiraturyan A. N., Uglova E. V., Elgendy M. Z. Evaluation of Pavement Condition
Deterioration Using Artificial Intelligence Models .............................................................................................................. 272
Babushkina N. E., Lyapin A. A. Solving the Problem of Determining the Mechanical Properties of Road
Structure Materials Using Neural Network Technologies ..................................................................................................
285
179
Стр.4