Engineering & Technologies 1 (2015 8) 57-60 ~ ~ ~ УДК 621.777 Innovative Technologies of Metal Forming Based on Combination Processes of Casting, Extruding and Rolling Nikolai N. Dovzhenko* and Sergey B. Sidelnikov Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia Received 14.11.2014, received in revised form 21.10.2014, accepted 18.01.2015 Were presented a description of the innovative new technologies of production of a small crosssectional products made from non-ferrous metals and alloys with using combined methods of casting and metal forming. <...> Sets out the technical and technological solutions, allowing obtaining semi-fi nished products from compact and non-compact billets from different non-ferrous metals and alloys. <...> All rights reserved * Corresponding author E-mail address: sbs270359@yandex.ru # 57 # Nikolai N. Dovzhenko and Sergey B. Sidelnikov. <...> Innovative Technologies of Metal Forming Based on Combination… In the world production semi-fi nished products from non-ferrous metals and alloys especially rapidly growing manufacturing of small cross-sectional extruded articles (rolled wire, electrical and welding wire, solid profi les of small sections, ligature rods, etc.) for industries such as construction and electro technical industry, production profi les for fi nishing, packaging, jewelry industry and other. <...> In this case, used in the manufacture of such products alloys are characterized by a fairly large spread of the mechanical properties, and some of them critically handled by plastic deformation (hardly deformed and non-plastic alloys) and can be characterized only as a foundry. <...> New technologies based on a combination of different operations and [1] application of modern casting technologies, for example, using an electromagnetic crystallizer (EMC), make it possible to expand the range of processed alloys and receive semi-fi nished products with a given level of plastic and strength properties. <...> In addition, the scientifi c interests are the results of research to attract for their production of secondary metals and alloys in the form of chips, powders, granules, etc. <...> Technology for producing such products, especially long, is multicycle and includes a number of intermediate technological operations using energy-intensive and metal intensive forming equipment, main type of which are the hydraulic presses and drawing machines. <...> These factors lead to high production <...>