Северный (Арктический) федеральный университет имени М.В. Ломоносова
Mechanical properties are crucial in assessing the paper quality. Deformation and
strength properties of paper are determined by the strength and stiffness of the interfiber and
intermolecular hydrogen bonds. The contribution ratio of interfiber and intermolecular hydrogen
bonds to the strength of paper can be changed by adjusting the degree of its anisotropy.
The article presents the results on a study of the deformation properties of laboratory
anisotropic paper samples from kraft bleached softwood pulp with a beating degree of
30 °SR. The samples had basic weight of 90 g/m2 and the degree of stiffness anisotropy TSIMD/CD
of 1.75–4.08. They were made by using Techpap SAS automatic dynamic handsheet former
(Grenoble, France), with varying forming parameters – diameter of the nozzle, motion speed
of the forming wire, and injecting speed of pulp. Deformation properties were determined by
tensile test and processing of the stress-strain dependence (σ−ε). The outcomes have shown
that, an increase of the fiber orientation degree in paper structure by changing the forming
parameters caused a change in the nature of the paper deformation under tension. Increasing
the fiber orientation degree in the structure of paper made it possible to increase the strength
by 55 %, tensile stiffness by 63 % in the machine direction, while reducing the extensibility by
10 %. In the cross direction, it was possible to decrease tensile stiffness by 33 %, strength
by 55 %, and increase the extensibility by 5 %. Anisotropy of tensile strength was
1.73–6.00. The greatest effect was obtained for the elasticity modulus in the pre-failure zone E2
(2.8–38.6). It means that, fiber orientation had a key importance when large deformations
in the samples took place. The established quantitative regularities allowed optimizing the
values of the deformation and strength properties of paper, and their ratio in the machine direction
and cross direction due to the variation of the forming parameters.
For citation: Rech D., Potasheva A.N., Kazakov Ya.V. Regulating the Deformation Properties
of Paper by Varying the Degree of Its Anisotropy. Lesnoy Zhurnal [Russian Forestry Journal],
2021, no. 5, pp. 174–184. DOI: 10.37482/0536-1036-2021-5-174-184
Механические свойства являются ключевыми при оценке качества бумаги и определяются прочностью и жесткостью межволоконных и межмолекулярных
водородных связей. Вклад разных видов связей в прочность образца возможно менять
регулированием степени анизотропии бумаги. Исследованы деформационные свойства лабораторных анизотропных образцов бумаги из беленой хвойной целлюлозы при
степени помола 30 °ШР, массе 90 г/м2, со степенью анизотропии жесткости TSIMD/CD
(отношение индексов жесткости при растяжении, TSIMD к TSICD) 1,75…4,08. Образцы
были изготовлены на динамическом листоотливном аппарате TechPap SAS (г. Гренобль,
Франция) при переменных параметрах отлива: скорости сетки, скорости струи, диаметре форсунки. Деформационные и прочностные свойства определены испытанием на
растяжение с получением зависимости «напряжение–деформация». Показано, что увеличение степени ориентации волокна за счет варьирования параметров отлива делает
прочность в машинном направлении больше на 55 %, жесткость при растяжении – на
63 %, снижает растяжимость на 10 %; в поперечном направлении возможно уменьшение жесткости при растяжении на 33 %, прочности – на 55 %, увеличение растяжимости на 5 %. Анизотропия прочности при растяжении составила 1,73…6,00. Наибольший эффект получен для модуля упругости в области предразрушения – 2,8…38,6,
т. е. ориентация волокна имеет ключевое значение при больших деформациях образцов.
Установленные количественные закономерности позволяют оптимизировать величины
деформационных и прочностных показателей бумаги и их соотношение в машинном и
поперечном направлениях за счет варьирования параметров отлива.
Для цитирования: Rech D., Potasheva A.N., Kazakov Ya.V. Regulating the Deformation
Properties of Paper by Varying the Degree of Its Anisotropy // Изв. вузов. Лесн. журн. 2021.
№ 5. С. 174–184. DOI: 10.37482/0536-1036-2021-5-174-184